Racnoss is a Cisco 2511 router with one breakout cable to connect 8 asynchronous serial devices. We could do with another similar cable as it has another port for 8 more devices.

It currently provides serial consoles for some of Tardis' PCs.

It runs Cisco IOS Version 10.2(8a).

Access from ace with

$ telnet cisco-serial <port>

|

Racnoss runs a telnet server and is also connected to the spiderport for administration. To setup a new port connect to Racnoss and run the following:

 Racnoss>en
 Password:
 Racnoss#conf t
 Enter configuration commands, one per line.  End with CNTL/Z.
 Racnoss(config)#int a
 Racnoss(config)#int async 5
 Racnoss(config-if)#description HOSTNAME
 Racnoss(config-if)#no ip address
 Racnoss(config-if)#async mode interactive
 Racnoss(config-if)#exit
 Racnoss(config)#exit
 Racnoss#