TARDIS Project

User Tools

Site Tools

Trace:
howto:specific:edit_ldap

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
howto:specific:edit_ldap [2024/09/10 14:19] – More in-depth instructions oxrushhowto:specific:edit_ldap [2024/09/10 14:23] (current) – More in-depth instructions oxrush
Line 3: Line 3:
 You will need an LDAP browser installed on your PC You will need an LDAP browser installed on your PC
  
-1. use SSH tunnelling like so ''ssh tardis -L 1389:enclave.internal.tardisproject.uk:389''+  - use SSH tunnelling like so ''ssh tardis -L 1389:enclave.internal.tardisproject.uk:389'' 
 +  - connect your LDAP browser using the following settings: 
 +    - Host: ''localhost'' 
 +    - Port: ''1389'' 
 +    - Base: ''dc=tardisproject,dc=uk'' 
 +    - Username: ''uid=admin,dc=tardisproject,dc=uk'' 
 +    - Password: The LDAP admin password, available to admins through the usual channels
  
-2. connect your LDAP browser using the following settings: 
-  a. Host: ''localhost'' 
-  b. Port: ''1389'' 
-  c. Base: ''dc=tardisproject,dc=uk'' 
-  d. Username: ''uid=admin,dc=tardisproject,dc=uk'' 
-  e. Password: The LDAP admin password, available to admins through the usual channels 
- 
-3. Make the changes in your LDAP browser 
- 
-4. Exit the browser and end the SSH tunnel 
  
 (replace 1389 with any available port number) (replace 1389 with any available port number)
howto/specific/edit_ldap.txt · Last modified: 2024/09/10 14:23 by oxrush